Sensitive switch MH21 Series

Characteristics

Type
sensitive
Number of poles
single-pole
Protection level
rugged
Other characteristics
Hall effect
Primary current

4 mA

Voltage

24 V

Description

MH21 series Hall Effect Sensor are packaged in a screw fastened flange mount rectangular housing with cable terminals. MH21 hall sensor custom options include: output- switch, latch, etc., high temperature resistance, package design and much more. Also available in a micro-power version that operate on 2.5-3.5V battery voltage with only 5μA average supply current vs. the industry average of 5mA. The Standex Electronics MH21 series Hall Effect Sensor design offer solid state reliability, low power consumption, and consistent activation points over a wide temperature range in a rugged and environmentally isolated package.

Notes: Add external pull-up resistor (RL) for sinking output between VCC and VOUT. Add external bypass capacitor (CBYP) close to the sensor to reduce external noise as needed.

Specifications

Function Type – S (Switch), L (Latch) Standard S, L, Micro-power Switch only
Sensing Range – Operate|Release Standard (S) 95G|70G, (L) 22G|-23G, Micro-power 37G|31G
Voltage Supply Standard 3-24V, Micro-power 2.5-3.5V
Current Supply Standard 4mA, Micro-power 2mA
Output Leakage Current Max. Standard 10μA, Micro-power 1μA
Output On Voltage Typ. Standard 185mV, Micro-power 100mV
Chopping Frequency Typ. Standard 800kHz, Micro-power 340kHz
Operating Temperature -40 to 85C (Higher temp. versions available)

Applications

Standex Hall Effect Sensor products are ideal in limited space requirements, surface mount, speed sensor – fast response, outputs beyond on/off, linear output, programmable, latching, polarity sensitive, and much more….

Related Posts

Touch switch 83450,83451,83453 series

Characteristics Type touch Number of poles single-pole, 2-pole Protection level IP40 Other characteristics momentary Primary current 5 A Voltage 250 V Description TYPESubminiature ActionMomentary ConnectionsSolder

Sensitive switch FSA series

Characteristics Type sensitive Number of poles multipole Other characteristics analog Description Fairchild is an established supplier for switch products for use in portable and consumer applications. Our…

Sensitive switch ST 14

Characteristics Type sensitive Number of poles single-pole, multipole Protection level insulated, IP67 Other characteristics with separate actuator, thermoplastic, double, safety, electromechanical Primary current 0.13 A, 6 A…

Tactile switch MICON 5 series

Characteristics Type tactile, SMD Number of poles single-pole Other characteristics for automotive applications, PCB, momentary, snap-action, miniature Primary current Min.: 0.01 mA Max.: 100 mA Voltage Min.: 0 V Max.: 35…

Panel-mount switch CG series

Characteristics Type sensitive, capacitive Number of poles single-pole Protection level vibration-resistant Other characteristics panel-mount Primary current 15 mA, 200 mA Voltage 5 V, 12 V, 24 V…

Touch switch CFA 7603 series

Characteristics Type touch Number of poles single-pole Other characteristics momentary, stainless steel Voltage 24 V Description Three maintained contacts, one momentary contact Stainless steel faceplate Heavy duty…