Touch switch CEM-AY-C40


Number of poles
Other characteristics
solenoid, without guard, safety, electromagnetic, door
Primary current

100 A


Max.: 30 V

Min.: 0 V


Benefits for you

Safety switch with integrated mounting magnet for process protection (without guard locking monitoring)
Integrated CES-AY electronics
A special evaluation unit is not required
Safety category 4 and PL e according to EN ISO 13849-1 for the door position monitoring

Design and functionality

The CEM safety switches have, in addition to the transponder, a mounting magnet for holding the guard in the locked position. It offers a series of functional and safety-related advantages, because the guard locking principle is realized by the direct action of electromagnetic force between the switch and actuator. With this type there are no longer any protruding parts and therefore no risk of injury. The devices have no insertion openings for actuators in which dust can collect.

The anchor plate for the CEM actuator is mounted on a floating bearing and can be tilted up to an angle of +/-4°. Therefore, when a misadjusted safety door is closed, the CEM actuator automatically adjusts itself to the surface of the solenoid. Subsequent adjustment of the safety door is no longer necessary. Even with a center offset of 5 mm (anchor plate in relation to solenoid) the full locking force is achieved.

Related Posts

Touch switch 83450,83451,83453 series

Characteristics Type touch Number of poles single-pole, 2-pole Protection level IP40 Other characteristics momentary Primary current 5 A Voltage 250 V Description TYPESubminiature ActionMomentary ConnectionsSolder

Sensitive switch FSA series

Characteristics Type sensitive Number of poles multipole Other characteristics analog Description Fairchild is an established supplier for switch products for use in portable and consumer applications. Our…

Sensitive switch ST 14

Characteristics Type sensitive Number of poles single-pole, multipole Protection level insulated, IP67 Other characteristics with separate actuator, thermoplastic, double, safety, electromechanical Primary current 0.13 A, 6 A…

Tactile switch MICON 5 series

Characteristics Type tactile, SMD Number of poles single-pole Other characteristics for automotive applications, PCB, momentary, snap-action, miniature Primary current Min.: 0.01 mA Max.: 100 mA Voltage Min.: 0 V Max.: 35…

Panel-mount switch CG series

Characteristics Type sensitive, capacitive Number of poles single-pole Protection level vibration-resistant Other characteristics panel-mount Primary current 15 mA, 200 mA Voltage 5 V, 12 V, 24 V…

Touch switch CFA 7603 series

Characteristics Type touch Number of poles single-pole Other characteristics momentary, stainless steel Voltage 24 V Description Three maintained contacts, one momentary contact Stainless steel faceplate Heavy duty…